CFS Diamond Staining Agent CFS-200/CFS-201
1,CFS-200/CFS-201
Before we begin, let me briefly introduce Kangfusi Diamond Crystal Dyeing Agent. It is a single component oily material that combines the advantages of color transparency, hardened flooring, and water migration resistance. It has excellent characteristics of brightness, smoothness, and transparency. Kangfusi Floor Diamond Crystal Dyeing Agent can penetrate into the interior of concrete, forming a strong color bond and ensuring that colors do not fade for a long time.
2, Principles of Hardening and Color Fastness
The components in the colorant react with the concrete in nano silica solidification reaction. Some form new chemical sol with calcium hydroxide in the coagulation, and a few self shrink into water insoluble gel. They are firmly combined with the original concrete by silicon oxygen bond, and block the concrete pores. The concrete density is increased, and the water in and out is reduced. The high hardness of the reaction product enhances the hardness of the concrete. At the same time as sealing and curing, lock the dye that is bound to the concrete inside.
The weather resistant and permeable sealing agent in the dye penetrates into the interior of the concrete, firmly bonding with the concrete through silicon oxygen bonds, locking in color, and further enhancing the compactness of the concrete.
Reactants and sealants can lock in color and bond with concrete, and fill the pores of concrete, reducing dye migration caused by water ingress and egress. At the same time, due to the wrapping of colors, the light energy is slowed down, and the fastness to light dyeing is improved.
3, Construction process
I believe everyone has a preliminary understanding of the performance characteristics of the product. Below, we will introduce the specific construction process of Kangfusi Diamond Crystal Dyeing Agent.
1. Preliminary preparation
Before making a dyed floor, it is necessary to grind the floor flat and solidify it to prevent uneven color in the later stage.
2. Apply dye
Spray the dye evenly on the ground from the sprayer, and then use a mop to push it evenly.
3. Apply glaze sealant
After the ground is completely dry, use Kangfusi two-component sealing agent to spray evenly on the ground.
4. Polish the floor
After the ground is completely dry, use the CFS high-speed polishing machine CFS-P70 for polishing
5 Effect Display
At this point, the construction process of the dyeing agent has been completed. Let's enjoy the final effect together!
Partial case display of dyed flooring
