concrete grind

Preparation before use
1. Use power supply with ground and contact protector (380V is three-phase and four-wire)
2. Cable is not allowed to have broken naked wire phenomenon, wire needs to use gb 4 square and above.
3. Adjust the handle height, in order to make the best state of manpower pull down, pull down the handle, lift the whole base, support foot support to the ground stable, and then let go.
4. When installing the polishing pad, glue the polishing pad directly to the polishing disc.
5. After the polishing cushion is installed, place your foot on the support part while holding the handle with your hand and slowly forward to rest the whole machine smoothly on the ground
6. Open the start switch, from low speed gradually to high speed operation, to see whether the machine is normal and stable. The speed depends on the ground condition adjustment, the general situation to 1500-1800 to the best.

The GDY680 concrete grinding and polishing machine system is a self-propelled system, equipped with a 15HP Delta frequency converter, and adopts world-class wand brand-name motors.
The 680 concrete grinding and polishing machine system is a self-propelled system, equipped with a 15HP Delta frequency converter, and adopts world-class WEG brand-name motors. The 680 automatic concrete floor leveling and grinding machine has stable performance and high grinding efficiency. , It is the ideal equipment for floor engineering treatment. The 680 self-driven floor grinder is one of the most efficient floor preparation equipment manufactured by CFS