concrete polishing

Press the start button to start the machine while working
Slowly rotate the speed control knob to adjust to the required construction speed and enter the normal grinding state.
If you encounter an emergency, immediately press the red brake button and the machine will stop working immediately.
When starting and stopping work, the operator must protect the machine and keep moving the machine at a constant speed. It must not be ground in place to avoid damage to the grinding disc. The machine heats up sharply and the floor is severely burned.
Avoid protrusions on the ground, such as steel bars.

1. CFSi driven heavy-duty grinding machine adopts imported bearings and well-known brand motors to ensure its durability.
2. Integrated aluminum gear box, with good heat dissipation performance, high gear accuracy and stable operation.
3. The ground cutting efficiency is high and the overall design is strong.
4. The weight is heavier than similar products, greatly improving the on-site construction efficiency,
5. Double oil seal leak proof protection, extending the service life of the machine.
6. Drive type, which can drive one key walking.

1. Four grinding discs cross operation, grinding without space, can install all kinds of consumables.
2. Folding handle, integrated central control panel design, convenient operation, safe and reliable.
3. Three-phase voltage control, high safety.
4. Inverter built-in motor overload protection, leakage/phase loss protection.
5. Equipped with double LED lights and integrated counterweight iron to improve ground grinding efficiency.

1. Four grinding discs cross operation, grinding without space, can install all kinds of consumables.
2. Folding handle, integrated central control panel design, convenient operation, safe and reliable.
3. Three-phase voltage control, high safety.
4. Inverter built-in motor overload protection, leakage/phase loss protection.
5. Equipped with double LED lights and integrated counterweight iron to improve ground grinding efficiency.

1. Four grinding discs cross operation, grinding without space, can install all kinds of consumables.
2. Folding handle, integrated central control panel design, convenient operation, safe and reliable.
3. Three-phase voltage control, high safety.
4. Inverter built-in motor overload protection, leakage/phase loss protection.
5. Equipped with double LED lights and integrated counterweight iron to improve ground grinding efficiency.

1.Grinding concrete/epoxy floor/ solidified floor/ terrazzo floor /granite floor /natural marble floor /diamond abrasion resistant floor lf leveling cement,etc.
2. places requiring surface treatment
3. Removal of paint, epoxy, glue and other coatings from concrete
4. Preparation of concrete for installation of new flooring/coating
5. Elimination of irregularities in concrete
6. Repair of damaged concrete
7. Renovation works

1. Drive type independent walking grinding, reduce labor intensity, forward and backward control by one key.
2. The four planetary grinding heads turn to each other, and the plate rotates clockwise to evenly distribute the cutting force to the ground and improve the grinding efficiency.
3. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
4. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
5. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floor.

1. Stepless adjustment of grinding pressure, Which can be selected to adapt to the grinding of various construction floors;
2. The polishing area is large, The water tank is convenient to add water, And the seat armrest is safe, Reliable and humanized;
3. Double control by wire and remote control, Arbitrary switching and stepper motor drive to realize low-speed and high torque operation;
4. Toolbox charger and mobile phone charging head are fully configured.

Press the start button to start the machine while working
Slowly rotate the speed control knob to adjust to the required construction speed and enter the normal grinding state.