floor grinder

Press the start button to start the machine while working
Slowly rotate the speed control knob to adjust to the required construction speed and enter the normal grinding state.
If you encounter an emergency, immediately press the red brake button and the machine will stop working immediately.
When starting and stopping work, the operator must protect the machine and keep moving the machine at a constant speed. It must not be ground in place to avoid damage to the grinding disc. The machine heats up sharply and the floor is severely burned.
Avoid protrusions on the ground, such as steel bars.

When the ground drop is large, please grind from high to low to avoid hard impact damage to the grinding disc and gear box.
During ground grinding, pay attention to whether there are hard objects protruding from the ground, such as steel bars and expansion bolts. If there are hard objects protruding from the ground, avoid grinding to prevent equipment damage caused by violent impact.
After grinding the ground, clean the bottom of the equipment to increase its service life.

1. Drive type independent walking grinding, reduce labor intensity, forward and backward control by one key.
2. The four planetary grinding heads turn to each other, and the plate rotates clockwise to evenly distribute the cutting force to the ground and improve the grinding efficiency.
3. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
4. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
5. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floor.

1. Drive type independent walking grinding, reduce labor intensity, forward and backward control by one key.
2. The four planetary grinding heads turn to each other, and the plate rotates clockwise to evenly distribute the cutting force to the ground and improve the grinding efficiency.
3. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
4. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
5. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floor.

1. Four planetary grinding heads turn opposite, the plate rotates clockwise, evenly distribute the cutting force to the ground, improve grinding efficiency.
2. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
3. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
4. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floors.
The standard configuration list is as follows
Machine*1 Lifting lever*3 Retaining dress*1 The connection strap*12 Cable connector*1

1. CFSi driven heavy-duty grinding machine adopts imported bearings and well-known brand motors to ensure its durability.
2. Integrated aluminum gear box, with good heat dissipation performance, high gear accuracy and stable operation.
3. The ground cutting efficiency is high and the overall design is strong.
4. The weight is heavier than similar products, greatly improving the on-site construction efficiency,
5. Double oil seal leak proof protection, extending the service life of the machine.
6. Drive type, which can drive one key walking.

1. The four grinding discs run crosswise, leaving no gap for grinding, and various consumables can be installed.
2. Folding handle, integrated central control panel design, easy to operate, safe and reliable.
3. Three phase voltage control is adopted for high safety.
4. The inverter has built-in motor overload protection and leakage/phase loss protection.
5. It is equipped with dual LED lights and integrated counterweight iron to improve the ground grinding efficiency.

1. All 304 stainless steel water tank to meet the water mill at the same time more texture.
2. Professional inverter to protect the normal use of motor barrier-free.
3. The aluminum head is perfectly compatible with the gearbox, so that the water mill will not corrode the machine.
4. High-power LED lights can meet the aesthetic requirements and realize night grinding.
5. Four grinding discs cross operation, improve efficiency.

1. Four grinding discs cross operation, grinding without space, can install all kinds of consumables.
2. Folding handle, integrated central control panel design, convenient operation, safe and reliable.
3. Three-phase voltage control, high safety.
4. Inverter built-in motor overload protection, leakage/phase loss protection.
5. Equipped with double LED lights and integrated counterweight iron to improve ground grinding efficiency.