floor grind

Press the start button to start the machine while working
Slowly rotate the speed control knob to adjust to the required construction speed and enter the normal grinding state.
If you encounter an emergency, immediately press the red brake button and the machine will stop working immediately.
When starting and stopping work, the operator must protect the machine and keep moving the machine at a constant speed. It must not be ground in place to avoid damage to the grinding disc. The machine heats up sharply and the floor is severely burned.
Avoid protrusions on the ground, such as steel bars.

When the ground drop is large, please grind from high to low to avoid hard impact damage to the grinding disc and gear box.
During ground grinding, pay attention to whether there are hard objects protruding from the ground, such as steel bars and expansion bolts. If there are hard objects protruding from the ground, avoid grinding to prevent equipment damage caused by violent impact.
After grinding the ground, clean the bottom of the equipment to increase its service life.

1. Drive type independent walking grinding, reduce labor intensity, forward and backward control by one key.
2. The four planetary grinding heads turn to each other, and the plate rotates clockwise to evenly distribute the cutting force to the ground and improve the grinding efficiency.
3. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
4. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
5. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floor.

1. Drive type independent walking grinding, reduce labor intensity, forward and backward control by one key.
2. The four planetary grinding heads turn to each other, and the plate rotates clockwise to evenly distribute the cutting force to the ground and improve the grinding efficiency.
3. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
4. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
5. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floor.

1. Four planetary grinding heads turn opposite, the plate rotates clockwise, evenly distribute the cutting force to the ground, improve grinding efficiency.
2. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
3. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
4. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floors.
The standard configuration list is as follows
Machine*1 Lifting lever*3 Retaining dress*1 The connection strap*12 Cable connector*1

1. CFSi driven heavy-duty grinding machine adopts imported bearings and well-known brand motors to ensure its durability.
2. Integrated aluminum gear box, with good heat dissipation performance, high gear accuracy and stable operation.
3. The ground cutting efficiency is high and the overall design is strong.
4. The weight is heavier than similar products, greatly improving the on-site construction efficiency,
5. Double oil seal leak proof protection, extending the service life of the machine.
6. Drive type, which can drive one key walking.

The GD700P heavy-duty grinding machine with super chassis is the first product of Cornus after years of careful research and development. It is a heavy-duty grinding machine with unique appearance and overall design all over the world. It has a very mature technology to solve various problems such as old ground reconstruction and old epoxy floor reconstruction. It is a cost-effective machine.

1. The four grinding discs run crosswise, leaving no gap for grinding, and various consumables can be installed.
2. Folding handle, integrated central control panel design, easy to operate, safe and reliable.
3. Three phase voltage control is adopted for high safety.
4. The inverter has built-in motor overload protection and leakage/phase loss protection.
5. It is equipped with dual LED lights and integrated counterweight iron to improve the ground grinding efficiency.

1. The first performance grinder developed for grinding stone floor in China;
2. Double drive servo motor control system, precise control, and smaller turning radius without deviation;
3. The external vacuum cleaner interface does not affect the edging and grinding, and the soft connection is not afraid of bumps. It is simple and more convenient to connect with the vacuum cleaner, which improves the dust collection effect;
4. With its own weight and small volume, it can reduce the size of the site, greatly improve the operability of the control, and facilitate transportation, so it can easily solve various application scenarios of the millstone floor;
5. It has its own 10Ah battery to meet the requirements of non electric drive, which improves the flexibility of the machine and the application in specific occasions;
6. The design of electric valve and water tank switch makes it more convenient to switch between dry and wet grinding during operation;
7. Front and rear LED lights are separately controlled; Timer function; Exclusive drive motor protective cover. China