floor grind
-
Concrete Grinder Floor Grinding And Terrazzo Polishing Machine
1. Four grinding discs cross running, grinding without space, can install all kinds of grinding pad.
Email Details
2. Folding handle, integrated central control panel design, easy to operate, safe and reliable.
3. Three - phase voltage control, high safety.
4. Inverter built-in motor overload protection, leakage/phase loss protection.
5. Equipped with double LED lights and integrated casting counterweight iron, improve ground grinding efficiency. -
Epoxy Terrazzo Floor Grinder Grind Concrete Machine For Sale
1. Drive type independent walking grinding, reduce labor intensity, forward and backward control by one key.
Email Details
2. The four planetary grinding heads turn to each other, and the plate rotates clockwise to evenly distribute the cutting force to the ground and improve the grinding efficiency.
3. Three-level grinding weight, to ensure the working speed of the grinding machine and the stability of grinding pressure, to achieve accurate grinding.
4. The grinding speed and traveling speed can be adjusted freely to achieve the same grinding effect for different operations.
5. It can be used with industrial vacuum cleaner to realize dust-free grinding of dry and wet floor. -
Industrial Floor Polishing Machine Concrete Grinder For Sale
When the ground drop is large, please grind from high to low to avoid hard impact damage to the grinding disc and gear box.
Email Details -
Dust Free Concrete Floor Grinding Sanding Machine Grinders
1. All 304 stainless steel water tank to meet the water mill at the same time more texture.
Email Details
2. Professional frequency converter to protect the normal use of motor barrier-free.
3. The aluminum head is perfectly compatible with the reducer, so that water polishing will not corrode the machine.
4. High-power LED light can meet the aesthetic requirements and realize night grinding.
5. Four grinding discs cross operation to improve efficiency. -
Concrete Tools Terrazzo Floor Grinder Planetary Machine Finishing
Preparation before use
Email Details
1. Use power supply with ground and contact protector (380V is three-phase and four-wire)
2. Cable is not allowed to have broken naked wire phenomenon, wire needs to use gb 4 square and above.
3. Adjust the handle height, in order to make the best state of manpower pull down, pull down the handle, lift the whole base, support foot support to the ground stable, and then let go.
4. When installing the polishing pad, glue the polishing pad directly to the polishing disc.
5. After the polishing cushion is installed, place your foot on the support part while holding the handle with your hand and slowly forward to rest the whole machine smoothly on the ground
6. Open the start switch, from low speed gradually to high speed operation, to see whether the machine is normal and stable. The speed depends on the ground condition adjustment, the general situation to 1500-1800 to the best.